How to Refill the JNR Falcon X Plus 28000 Correctly?

The JNR Falcon X Plus 28000 vape is a powerful model in the industry. It is refillable and gives you 28,000 puffs. This way you can enjoy long-lasting performance without having to continuously purchase new vapes. 

The Falcon X Plus has a top refill system that makes filling easy and mess-free. It includes two 10ml bottles of e-liquid right in the box. It also has an indicator screen for the battery and a strong 950mAh battery.

However, to enjoy the best experience, you need to know how to refill it properly. This blogpost guide will cover all the steps; from setup to maintenance. Let us get started.

What Makes the JNR Falcon X Plus 28000 Special?

This vape is not your average single-use vape. It is a refillable system that gives you more control. The 1.2Ω pre-primed dual mesh coil delivers rich flavour and smooth vapor. The visible e-liquid levels let you track your e-liquid at a glance. In fact, even the battery indicator screen lets you know the status of your power level in real-time. All these features make it simple and reliable too.

Moreover, the Falcon X Plus comes with a 950mAh rechargeable battery. This gives constant energy supply throughout the day. The charging port, which is of type C, allows fast charging whenever it's required. The vape is designed for extended usability and cost efficiency. Refill after a few days and continue to use, cutting costs and waste.

What You Get in the Box?

When you purchase the JNR Falcon X Plus 28000, you receive everything you need to start vaping. The box includes the vape itself and two 10ml bottles of quality e-liquid that will be sufficient enough for your initial vaping experience. There are some yummy flavours of the JNR line in these e-liquid bottles.

No setup, no waiting. The Falcon X Plus comes pre-filled and pre-primed, so you can start vaping the moment it's out of the box. When that first tank runs low, just refill it with one of the bottles included. The top refill design makes the process simple and clean as there is no need for tools or complicated steps.

Refill Guide

Refilling the JNR Falcon X Plus is straightforward. Follow these steps carefully for the best results.

Step 1: Access the Refill Chamber

Start by removing the top cap of the vape. The Falcon X Plus has a top refill port, located at the top of the vape. Gently twist or pull the cap off and be careful not to damage any parts. Set the cap aside in a clean place.

Step 2: Check the E-Liquid Level

The vape has a visible tank so you can always see how much e-liquid is left. If the tank is completely empty, you need to refill but if there is still some liquid, you can top it up. Always refill before the tank runs dry as this prevents the coil from burning.

Step 3: Open the Tank Port

Find the refill port located at the top of the vape. This will usually be a small rubber plug or opening which you can easily open to fill the tank without damaging the rubber seal. The rubber seal keeps the vape leak-free.

Step 4: Add E-Liquid

Take an e-liquid bottle and insert its nozzle into the port. Gently squeeze the bottle into the hole so the e-liquid can fill the line. Don't overfill it, always leave some space.

Step 5: Close the Fill Port

Close the refill port after refilling it. The rubber plug must be secured properly to avoid the risk of any leakage. Wipe off any extra liquid using a tissue. A clean vape is a happy vape.

Step 6: Priming

Wait for some time after refilling and before vaping to allow the coil to soak in the new e-liquid. The Falcon X Plus has a pre-primed coil, but extra time helps so wait about two to three minutes. This ensures the wick is fully saturated while preventing dry hits and extending coil life.

Step 7: Start Vaping

You can start vaping once it's primed. In fact, the vape is completely draw-activated, so there are no buttons. Just pick it up and inhale for a smooth flavour experience. The 1.2Ω mesh coil delivers consistent vapor every time.

Signs It’s Time to Refill

Keep your Falcon X Plus refilled with e-liquid whenever it goes below the minimum level. It is advisable not to allow the tank to go dry since that may harm the coil. If you notice reduced vapor production or burnt taste, it is high time to refill your tank.

Common Refilling Mistakes 

These are some of the basic mistakes many vapers make:

Overfilling the Tank

Filling past the maximum line causes leaks. The liquid has nowhere to go but out, which creates a mess and wastes e-liquid. Always leave a small gap at the top for pressure changes and in order to prevent flooding.

Forgetting to Prime the Coil

Priming is essential for a new coil. Even though the Falcon X Plus comes pre-primed, it still needs time. Wait a few minutes after refilling before vaping. This lets the liquid soak into the wick. Skipping this step leads to dry hits and burnt coils.

Using the Wrong E-Liquid

Not all e-liquids work well with all vapes. The Falcon X Plus is designed for standard vape e-liquids. Avoid very thick liquids like high VG blends, these can clog the coil and reduce flavour. Stick to balanced 50/50 or similar ratios for best results.

Ignoring the Battery Level

Vaping with a low battery affects performance as the vapor becomes weak and unsatisfying. The coil may not heat properly so charge your vape when the battery indicator shows low power. A fully charged vape delivers the best experience.

Maintenance of Your Vape

Taking care of your vape's cleanliness is important in order for it to work properly. You can clean the outside by using a soft cloth while checking the refilling point for any build-up. Clean the contacts if you notice connectivity issues. A clean vape lasts longer and performs better.

Moreover, replace the coil when needed. The Falcon X Plus has a 1.2Ω dual mesh coil. The coil gradually wears out, and you will realize that your vapor or flavour output is low. In such instances, you need to change your coil. Additionally, you should prime your new coil in the same manner.

Conclusion

Refilling the JNR 28k is simple when you follow the right steps. The first thing you need to do is just remove the top cap so you can see the refill port and add the e-liquid. Do not overfill it, and just close the port securely. Next, you need to wait a few minutes, this is known as priming.

This ensures smooth flavour and prevents dry hits. Also, the vape offers 28,000 puffs and a refillable design that saves money and reduces waste. Even the visible tank and battery screen make monitoring easy. 

Furthermore, just make sure that you avoid common mistakes and follow regular maintenance tips. Indeed, this will give you the top-tier vaping experience.